How to Replace a Mazda Key
Mazda is a brand known for its innovative and intuitive technology. Certain systems improve performance or safety, while others help make driving your Mazda around East Stroudsburg, Easton, and Brodheadsville simpler.
The key fob is a great example of the latter. This device allows you to lock and unlock your Mazda by pushing a button. However its battery should be replaced every now and then.
Lost Keys
Keys that are lost or stolen are a huge hassle. Fortunately, it's easy to replace keys. Mazda key for older models that have regular metal keys, however modern cars require special programmable computer chips that can only be manufactured by a dealer or a locksmith.
You must begin by obtaining the VIN number for your vehicle. You can find this information on the dashboard of the car, on your insurance card or in the documents for your vehicle. Be sure to record the details so that you can give it to the locksmith or dealer.
You'll need a spare key that works. Place the key in the slot and turn the ignition to ON. After about five seconds, you can remove the key and switch the ignition off. Repeat this procedure with the second working key. Once both keys are inserted and the computer chip of your car is linked to the new key.
If you have lost your keys and do not have a backup, you'll have to have the car towed to a dealer. Then, you'll have to provide proof of ownership, and pay for the replacement key. You may need to wait a few days as the dealer is able to order and pair a replacement key to your vehicle. You will save time and money by hiring a locksmith to replace your key, instead of going to the dealer.
Repairing the ignition Cylinder
The ignition cylinder inside your Mazda is the most important component that allows you to start your car by using the key. If you're having trouble turning it on or you're unable to insert the key into the switch, the ignition cylinder may need be replaced.
Ignition cylinders are prone to failure more often than keys, which last for longer. There is no set maintenance routine for them, however you can help them last by keeping your key clean and avoiding excessive shaking or jiggling of the key.
To replace the ignition coil, take off any covers or trims that are in the way. Depending on the model, you may need to take off the steering wheel cover. It is also possible to remove the wiper and accessory switch. Use a socket wrench or screwdriver to depress the release tab on cylinder. This will free the cylinder from its switch and let it slide out.
Install the new cylinder by connecting the wires to it, then tightening the two screws on the top and then replacing the switch. Reconnect the battery, and test the insertion/removal function of the new cylinder. Connect the battery, then repeat the process three to five times more. Then try to start your vehicle to ensure everything is working as it should.
how to open a mazda cx 5 key fob
When your Mazda key remote stops working, you'll need a professional to get it back to working. Although this isn't as frequent as an ignition cylinder issue, it does happen, and can still cause you to be in a bind in a few cases. A locksmith can fix your car remote and handle all the programming that comes with it.
You will need to tell a locksmith the year and the model of your Mazda car in order to have them complete this. This will allow them to collect the proper equipment and also know if additional programming of keys is required for your Mazda model.
If your key fob isn't turning on, it might have a low battery. The best thing to do in this case is try to reset the receiver, since this can often bring back functionality. If this doesn't work you will need to replace the batteries. To accomplish this, take off the metal key, and then use a tape-wrapped flathead screwdriver to pry open the case on one side, then on the other. Once you've completed this it's time to insert a brand new battery into the key fob. Make sure that it's a suitable battery and then close the case. The Mazda's RF unit has to be reset to recognize the key.
Transponder Chip Replacement
If you own an Mazda key fob or smart key, there is a good chance that your car has a transponder chip inside. This tiny piece of technology, which is in essence an electronic micro-motherboard, transmits a signal to the immobilizer in your car when it is installed in the ignition.
These types of keys are incredibly helpful in terms of security, because they block other people from opening your car by ensuring that the only person who can actually start your vehicle is you. This is the reason you need be extra cautious to make sure that your key doesn't get lost or stolen.
Fortunately, transponder chips can be replaced by a professional locksmith. To do this, you'll have to remove the cover on your key fob. It's usually thin plastic piece that can be removed with an screwdriver. Next, you'll need to remove the chip, which should look like an unassuming black square or a see-through tube. Once you've completed this you can place the chip onto the adhesive tape and connect it to the ignition lock.
A professional locksmith should be able to accomplish this in no time, and they'll be able to assist you get your car back on the road as quickly as they can. Call a mobile locksmith if you are having issues with your Mazda key.